Products
Related Products
FTV-A type electric furnace flame monitoring device
Key words:
Classification:
Flame Monitoring System
Hotline:
FTV-A type electric furnace flame monitoring device
The FTV-A type electric furnace flame monitoring device uses the motor as the power source to drive the rack and pinion drive, and the operator can control the advance and retreat movement of the optical transmission mechanism in the central control room or on-site control cabinet. This type of device has a self-protection function, that is, when the periscope tube loses air-cooling protection or overtemperature, the optical image transmission mechanism will automatically exit the furnace, thereby protecting the safe operation of the device. In addition, this device can be connected to the plant-wide closed-circuit monitoring system and DCS control system, and the operator can also monitor and control it through the above two systems.
FTV-A electric furnace flame monitoring device has the advantages of clear imaging, reliable operation, convenient installation and maintenance, and has been widely used in petrochemical and electric power fields.
Main technical parameters
Observation field range: 50 °, 90 °, 105 °, 120 °;
Lens angle: 0 ° (direct view), 45 °, 60 °;
Working environment of protective cover:-40 ℃ ~ 70 ℃;
Heat-resistant temperature of lens: ≤ 2000 ℃;
Parameters of air source required by the device:
Wind pressure of wind source ≥ 0.3Mpa;
Wind source flow ≥ 0.3m3/min;
Air temperature ≤ 40 ℃, dust particle size ≤ 10 μm;
Oil content ≤ 10 mg/m3;
Working power supply: AC 220V, 50HZ, 300W;
Way of advance and retreat: electric advance and retreat;
Automatic exit conditions;
When the wind pressure at the protection wind inlet of the periscinent tube is lower than 0.04MPa, the image transmission system automatically exits the work site;
When the temperature in the protective cover is higher than 70 ℃, the image transmission system automatically exits the work site;
Weight of the whole machine: 43.5kg (on-site probe part).
Installation method: welding;
Product Selection Table
| FTV | Product Number | Number Description | Content | ||||||
| movement mechanism | -A | Electric | It is suitable for the monitoring of coal, gas and various direct fuel combustion industrial furnaces in petrochemical, electric power and metallurgical industries. | ||||||
| -C | Pneumatic type | ||||||||
| -H | Manual | ||||||||
| -G | Fixed | ||||||||
| signal transmission | L | optical cable transmission | Suitable for working conditions with long signal transmission distance and strong signal interference (Transmission distance ≥ 250m). |
||||||
| C | Cable transmission | Suitable for appropriate signal transmission distance and weak signal interference conditions (Transmission distance <250m). |
|||||||
| Air cooling protection | I | Instrument air source | It is applicable to the working condition with instrument air source on site. | ||||||
| II | Vortex air pump air source | It is applicable to the working condition without instrument air source on site. | |||||||
| III | Low pressure air source | It is applicable to the working condition with low pressure wind source on site. | |||||||
| "-" (other function code) | |||||||||
| Function | R | 330 ° electric circumferential rotation | It can comprehensively, timely and intuitively grasp the various working conditions in the furnace, and has a larger monitoring range, especially suitable for various heating furnaces in the petrochemical industry and the monitoring of boilers in the biological power generation industry. | ||||||
| T | furnace temperature measurement | The combination of infrared thermal imaging technology and computer image digital processing technology can measure the real temperature of each target point or designated area in the whole monitoring field of view in the whole furnace in real time. It is especially suitable for all kinds of industrial furnaces in petrochemical industry. | |||||||
| D | intelligent control | Using computer image processing technology for further analysis and processing of surveillance images, so as to achieve fire alarm, automatic compression and storage of images, automatic calibration of flame center, temperature field display and other intelligent control. It is especially suitable for working conditions with strict requirements for intelligent control. | |||||||
| Ex | Explosion-proof | Suitable for petrochemical and power industry for explosion-proof environment The use of demand. Explosion-proof rating: Ex-dIIBT4 Gb/Ex-dIICT4 Gb/Ex-dIICT6 Gb |
|||||||
Selection example
FTV-ACI-TREx
Electric furnace flame monitoring device
Signal transmission: cable transmission, air cooling protection: instrument air source, with 330 ° electric circumferential rotation function, with furnace temperature measurement function, with explosion-proof function









Next
Previous Page
None
Next Page
Related Products