>
>
>
UDZ type electric contact water level gauge

UDZ type electric contact water level gauge

UDZ type electric contact water level gauge

Tel:800-890-5355
UDZ type electric contact water level gauge
产品介绍

 

The UDZ type intelligent electric contact water level meter is composed of a measuring cylinder and a secondary meter. The installation position of the electric contact on the measuring cylinder corresponds to the light-emitting diode on the secondary meter, and the secondary meter displays the water level value in the control room. The secondary meter adopts single chip microcomputer and integrated circuit, which has the ability of intelligent analysis and judgment. When the water level is abnormal, it can perform sound and light alarm and interlock control. This type of instrument has the advantages of stable performance, reliable operation and convenient maintenance. It is widely used in boiler drums, water tanks and other water containers with different pressures and temperatures.

Working principle
Due to the great difference in electrical conductivity between water and steam, taking the boiler drum of a power plant as an example, the general water resistance is tens of KΩ, and the steam resistance is more than 1MΩ. The electrical signal is sent to the secondary meter, and the multi-way switch circuit in the secondary meter gates the resistance value information of each electrical contact point in time, converts it into a voltage signal and sends it to the A/D converter, where it becomes a digital quantity, which is sampled by the single-chip microcomputer. Afterwards, the corresponding resistance value is calculated and compared with the preset critical value. The contacts larger than the critical value are in the steam, and the CPU makes the LED display red through the I/O circuit; the contacts smaller than the critical value are in water, and then display green. The tube directly displays the water level value.

Technical advantages
UDZ type intelligent electric contact water level gauge has a variety of electrodes for users to choose from. Users can choose the appropriate electrode type according to the specific working conditions on site. Among them, the TGZM104 cone surface sealing electrode is our company's characteristic product. The electrode contact material is made of stainless steel, and the electrode seat material is made of cemented carbide, which has the advantages of high strength, wear resistance, high temperature resistance and corrosion resistance, and its sealing structure can effectively Prevent the occurrence of electrode scaling, corrosion, leakage, etc., and improve the service life of the electrode.

UDZ type intelligent electric contact water level gauge is equipped with functions such as sound and light alarm, interlock control and heat tracing. Users can choose the corresponding configuration according to on-site needs. According to the on-site working conditions, the user can set multi-point water level alarm on the secondary meter. When the water level is abnormal, the secondary meter will issue an audible and visual alarm to indicate that the water level is abnormal, and the interlocking control can be achieved by connecting to the on-site control system.

UDZ type intelligent electric contact water level gauge has two types of heat tracing functions: steam tracing and electric tracing. Steam tracing is to use the saturated steam in the steam drum to heat the measuring cylinder. At the same time, it is equipped with a condensing device, so that the water sample in the measuring cylinder is pure water with the same temperature as the steam drum, which improves the service life of the electrode and the measurement accuracy. Electric heat tracing is to use a ceramic heater to heat the measuring cylinder, so that the temperature in the measuring cylinder is consistent with the temperature in the steam drum, and the measurement accuracy is higher.



Selection parameter table

UDZ-191A Product number Number Description
  -4.0   Design pressure: 4.0MPa
-6.4   Design pressure: 4MPa
-12   Design pressure: 2MPa
-16   Design pressure: 6MPa
-22   Design pressure: 2MPa
  B1   Steam tracing
B2   Electric heat tracing
  /Y Push-in electrode
/X Screw-in electrode
/S Graphite Sealed Electrode
/Z Cone Seal Electrode
Operating temperature 0~540℃
Center distance 670mm or according to user requirements.
Material 20G/SA106/304/316 or configured according to user needs.
Number of measuring points (N) 2≤N≤33
Measuring point location 0, ±15, ±30, ±5075, ±100, ±150, ±200, ±250, ±300 or according to user requirements
Secondary meter working voltage 220V±22V、50Hz
Secondary table working environment -10~45℃, relative humidity≤85%
Secondary meter output contact capacity 220V、3A
Secondary meter power 10W
Connection method Welded or flanged connection

 

Selection example
UDZ-191A-6.4B2/S
UDZ type intelligent electric contact water level gauge Design pressure: 6.4MPa, electric heat tracing type, graphite sealed electrode

 

There is currently no content to display
Please add data record on website background.

Related Products

Cleaning and flushing high pressure two-color water level gauge
View details
Details 白箭头 黑箭头
Two-color quartz tube level gauge (with heat tracing)
View details
Details 白箭头 黑箭头
Level gauge with remote magnetic flap
View details
Details 白箭头 黑箭头
Three-window projection type two-color medium and low pressure glass plate level gauge
View details
Details 白箭头 黑箭头
Previous page
1
2
17
CSD
CSD
800-890-5355 800-890-5355
Service time:
9:00 - 17:00

Free service hotline

Add:72, Huigong Street, Yinzhou District, Tieling City, Liaoning Province
Switchboard:
024-74563511
Fax:024-74564356
Consumer hotline:
024-74563512

Domestic mailbox:tgyzll@vip.163.com

                     tgyzll@tltg.com.cn

International mailbox:int@tltg.com.cn

QR

Follow us

© 2021 LIAONING TIEGUANG INSTRUMEN CO., LTD. 辽ICP备05003504号 SEO